What do Automotive Body and Related Repairers Do

Automotive Body and Related Repairers

Most of the damage resulting from everyday vehicle collisions can be repaired, and vehicles can be refinished to look and drive like new. This damage may be relatively minor, such as scraped paint or a dented panel, or major, requiring the complex replacement of parts. Such repair services are performed by trained workers.

Automotive body and related repairers, often called collision repair technicians, straighten bent bodies, remove dents, and replace crumpled parts that cannot be fixed. They repair all types of vehicles, and although some work on large trucks, buses, or tractor-trailers, most work on cars and small trucks. They can work alone, with only general direction from supervisors, or as specialists on a repair team. In some shops, helpers or apprentices assist experienced repairers.

Each damaged vehicle presents different challenges for repairers. Using their broad knowledge of automotive construction and repair techniques, automotive body repairers must decide how to handle each job based on what the vehicle is made of and what needs to be fixed. They must first determine the extent of the damage and decide which parts can be repaired or need to be replaced.

If the car is heavily damaged, an automotive body repairer might start by measuring the frame to determine if there has been structural damage. Repairers would then attach or clamp frames and sections to structural machines that use hydraulic pressure to align damaged components. “Unibody” vehicles—designs built without frames—must be restored to precise factory specifications for the vehicle to operate correctly. For these vehicles, repairers use bench systems to accurately measure how much each section is out of alignment, and hydraulic machinery to return the vehicle to its original shape.

Only once the frame is aligned properly can repairers begin to fix or replace other damaged body parts. If the vehicle or part is made of metal, body repairers will use a pneumatic metal-cutting gun or a plasma cutter to remove badly damaged sections of body panels and then weld or otherwise attach replacement sections. Less serious dents are pulled out with a hydraulic jack or hand prying bar or knocked out with hand tools or pneumatic hammers. Small dents and creases in the metal are smoothed by holding a small anvil against one side of the damaged area while hammering the opposite side. Repairers may also remove very small pits and dimples with pick hammers and punches in a process called metal finishing. Body repairers then use plastic or solder to fill small dents that cannot be worked out of plastic or metal panels. On metal panels, they sculpt the hardened filler to the original shape by filing, grinding and sanding the repair back to the shape that is desired.

Body repairers may also repair or replace the plastic body parts that are increasingly used on new vehicles. They remove damaged panels and identify the type and properties of the plastic used. Some types of plastic allow repairers to apply heat from a hot-air welding gun or immerse the panel in hot water and press the softened section back into shape by hand. In most cases, it is more cost effective for the plastic parts to be replaced rather than to be repaired. A few body repairers specialize in fixing fiberglass car bodies.

Some body repairers specialize in installing and repairing glass in automobiles and other vehicles. Automotive glass installers and repairers remove broken, cracked, or pitted windshields and window glass. Glass installers apply a moisture-proofing compound along the edges of the glass, place the glass in the vehicle, and install rubber strips around the sides of the windshield or window to make it secure and weatherproof.

Many large shops make repairs using an assembly-line approach where vehicles are fixed by a team of repairers who each specialize in several types of repair. One worker might straighten frames while another repairs doors and fenders, for example. In most shops, automotive painters do the priming and refinishing, but in small shops, workers often do both body repairing and painting.

Work Environment

Automotive body and related repairers held about 153,700 jobs in 2020. The largest employers of automotive body and related repairers were as follows:

  • Automotive body, paint, interior, and glass repair - 59%
  • Automobile dealers - 16%
  • Self-employed workers - 10%
  • Automotive mechanical and electrical repair and maintenance - 5%

Automotive glass installers and repairers held about 19,700 jobs in 2020. The largest employers of automotive glass installers and repairers were as follows:

  • Automotive body, paint, interior, and glass repair - 82%
  • Self-employed workers - 6%
  • Construction - 3%

Body repairers typically work indoors in body shops, which are often noisy. Most shops are well ventilated, so that dust and paint fumes can be dispersed. Glass installers and repairers often travel to the customer’s location to repair damaged windshields and window glass.

Automotive body and glass repairers sometimes work in awkward and cramped positions, and their work can be physically demanding.

Work Schedules

Most automotive body and glass repairers work full time. When shops have to complete a backlog of work, overtime is common. This often includes working evenings and weekends.

Education & Training Required

A high school diploma or GED is often all that is required to enter this occupation, but more specific education and training is needed to learn how to repair newer automobiles. Collision repair programs may be offered in high school or in postsecondary vocational schools and community colleges. Courses in electronics, physics, chemistry, English, computers, and mathematics provide a good background for a career as an automotive body repairer. Training programs combine classroom instruction and hands-on practice.

Trade and technical school programs typically award certificates to graduates after 6 months to a year of collision repair study. Some community colleges offer 2-year programs in collision repair. Many of these schools also offer certificates for individual courses, so that students are able to take classes incrementally or as needed.

New repairers begin by assisting experienced body repairers in tasks such as removing damaged parts and sanding body panels. Novices learn to remove small dents and make other minor repairs. They then progress to more difficult tasks, such as straightening body parts and installing either repaired or replaced bolt-on parts. Generally, it takes 3 to 4 years of hands-on training to become skilled in all aspects of body repair, some of which may be completed as part of a formal education program. Basic automotive glass installation and repair can be learned in as little as 6 months, but becoming fully qualified can take several years.

Continuing education and training are needed throughout a career in automotive body repair. Automotive parts composition, body materials, electronics, and airbags and other new safety components continue to change and to become more complex. To keep up with these technological advances, repairers must continue to gain new skills by reading technical manuals and furthering their education with classes and seminars. Many companies within the automotive body repair industry send employees to advanced training programs to brush up on old skills or to learn new techniques.

Other Skills Required

Fully skilled automotive body repairers must have good reading ability and basic mathematics, including geometry, physics, and computer skills. Restoring unibody automobiles to their original specification requires repairers to follow instructions and diagrams in print and digital technical manuals and to make precise three-dimensional measurements of the position of one body section relative to another. In addition, repairers should enjoy working with their hands and be able to pay attention to detail while they work.

How to Advance

Certification by the National Institute for Automotive Service Excellence (ASE), although voluntary, is the pervasive industry credential for experienced automotive body repairers. Many repairers, particularly in urban areas, need a national certification to advance past entry-level work. Repairers may take up to four ASE Master Collision Repair and Refinish Exams. Repairers who pass at least one exam and have 2 years of hands-on work experience earn ASE certification. The completion of a postsecondary program in automotive body repair may be substituted for 1 year of work experience. Those who pass all four exams become ASE Master Collision Repair and Refinish Technicians. Automotive body repairers must retake the examination at least every 5 years to retain their certification. Ongoing training through the Inter-Industry Conference on Auto Collision Repair (I-CAR) can lead to additional recognition as a Platinum technician. Finally, many vehicle manufacturers and paint manufacturers also have product certification programs that can advance a repairer's career.

As beginners increase their skills, learn new techniques, earn certifications, and complete work more rapidly, their pay increases. An experienced automotive body repairer with managerial ability may advance to shop supervisor, and some workers open their own body repair shops. Other repairers become automobile damage appraisers for insurance companies.

Job Outlook

Overall employment of automotive body and glass repairers is projected to grow 6 percent from 2020 to 2030, about as fast as the average for all occupations.

About 17,500 openings for automotive body and glass repairers are projected each year, on average, over the decade. Many of those openings are expected to result from the need to replace workers who transfer to different occupations or exit the labor force, such as to retire.

Employment

Much of the projected employment growth in these occupations is due to recovery from the COVID-19 recession that began in 2020.

New vehicles are getting safer, which will help reduce car accidents and, in turn, the need for repairs. Older vehicles, many of which do not have modern safety features, will continue to need repair and create demand for these workers.

Earnings

The median annual wage for automotive body and related repairers was $47,270 in May 2021. The median wage is the wage at which half the workers in an occupation earned more than that amount and half earned less. The lowest 10 percent earned less than $29,660, and the highest 10 percent earned more than $76,220.

The median annual wage for automotive glass installers and repairers was $37,920 in May 2021. The lowest 10 percent earned less than $28,470, and the highest 10 percent earned more than $57,680.

In May 2021, the median annual wages for automotive body and related repairers in the top industries in which they worked were as follows:

  • Automotive body, paint, interior, and glass repair - $47,450
  • Automotive mechanical and electrical repair and maintenance - $46,910
  • Automobile dealers - $46,720

In May 2021, the median annual wages for automotive glass installers and repairers in the top industries in which they worked were as follows:

  • Automotive body, paint, interior, and glass repair - $38,000
  • Construction - $37,940

The majority of repair shops and auto dealers pay automotive body and glass repairers on an incentive basis. In addition to receiving a guaranteed base salary, employers pay workers a set amount for completing various tasks. Their earnings depend on both the amount of work assigned and how fast they complete it.

Most automotive body and glass repairers work full time. When shops have to complete a backlog of work, overtime is common. This often includes working evenings and weekends.

Academic Programs of Interest


Automotive Collision Repair Technician
The Automotive Collision Repair Technician Program will teach a student how to prepare or review motor vehicle repair estimate reports to determine what needs to be fixed. The Automotive Collision Repair Technician student will also learn how to hammer out dents, buckles and other defects, remove damaged fenders, panels and grills and straighten bent frames. The Automotive Collision Repair Technician Program can usually be completed... more
Automotive Refinishing Technician
An Automotive Refinishing Technician program teaches a student to paint and refinishe automobiles, trucks, and buses whether it's a result of a collision, restoration work or a custom-design paint job. As an Automotive Refinishing Technicians, you will be responsible for calculating the amount of paint required for a job, mixing paint to exactly match existing colours, and blending paint to its correct thickness. Most Automotive... more
Automotive Upholsterer
An Automotive Upholsterer program teaches a student how to repair, recondition and replace upholstery, general interior furnishing and fabric tops of automobiles, trucks, buses. The Automotive Upholsterer program will usually take 4 years to complete. After graduation an Automotive Upholsterer can expect to work at motor vehicle dealerships, body shops or automotive specialty shops. One of the nice advantages of this program is that you... more